Tuesday, 8 September 2015

The finished article . . . . . . . .

After applying the epoxy over a couple of coats to build it up, the final finishing coat is applied and watched carefully while it dries to the point where it can be left for a couple of hours spinning away happily without the danger of losing shape, some Century rods are done with a very (over-thick in my opinion) thick application of resin which although it may look 'nice', is a bit heavy and unnecessary in reality.

Personally I prefer a compromise on the thickness between the extremes of the likes of Daiwa  (not enough) to Century (too much) and I generally do my builds and personal rods in 2 'decent' thickness coats. But anyway, I digress . . . . . .  the finished ring ....




See part 1 here!

Century 'Big Bertha' butt ring repair part 1 !

No comments:

Post a Comment